Xterior Insulation

Xterior Insulation

This System is a tested, warranted, code compliant and engineered Exterior Insulation Finish System for use on solid substrates that do not require a separate water or air barrier, such as concrete, CMU and brick. Xterior insulation gives this system the ability to meet any energy code requirements with the ease of one system and the design flexibility and lightweight system for any designers vision.


Exterior, new, retrofit, residential, multi-family, commercial, panelized, institutional, hotels, hospitals, retail centers, schools, condominiums, and government facilities. High Impact Systems Available.


System Bulletin:

Application Guide:

Code Reports:

All Files:

  • Poured Concrete
  • Unit Masonry
  • Brick
Insulation Board Attachment
  • Xi-Acrylic Base Coat
  • Xi-Dry Acrylic Base Coat
Continuous Insulation
  • Expanded Polystyrene
Base Coat
  • Xi-Acrylic Base Coat
  • Xi-Dry Acrylic Base Coat
Reinforcing Mesh
  • Xi-Mesh
  • Xi-Mesh6
  • Xi-Mesh10
  • BearMat 15/Xi-Mesh
  • BearMat 20/Xi-Mesh
Primer (Optional per specification) – highest finish coat aesthetic performance.
  • Xi-Alkali Resistant Primer
Finish Coat – Integrally colored and textured. Unlimited color selection, dirt pick up resistant
  • Xi-Textured Acrylic Finish
  • Xi-Flexx Finish
  • Ambient and surface temperature must remain above 40ºF (4ºC) during and for 24-hours after set has occurred.
  • Protect applied product from inclement weather until dry.
  • Fire Rated and Non combustible assemblies must be per the current Evaluation Report
  • For increase Impact resistance: Utilize BearMats in conjunction with Standard Mesh
  • Select colors with light reflectance value (LRV) greater than 20. Under extreme conditions, dark colors may increase the temperature of the polystyrene boards to greater than its allowable service temperature limit of 160ºF (71ºC).
  • System must terminate above grade per the current Evaluation Report.
  • No additives are permitted to any components unless specifically approved by FXI.
  • Follow the application instructions for each component.
  • Use only on surfaces that are sound, dry, clean, unpainted, and free from any residue that may affect the ability of the FACADESXi Products to bond.
  • For use on vertical above grade walls only.
  • Maintenance Required: periodic cleaning, recoating to enhance appearance of weathered finish.
  • Continuous Insulation out performs cavity insulation and gives greater energy savings
  • Impact resistant systems available
  • Mold and mildew resistant Finishes
  • Unlimited color and design aesthetics
  • EPS shapes for architectural details
  • Labor costs and time savings
  • Single wource warranty
  • Lower Cladding Weight for decreased structural requirements
  • Non-combustible and Fire resistant assemblies are available