FACADESXi MASONRY VENEER

Xterior Insulation Masonry Veneer

Xterior Insulation Masonry Veneer

Our Xterior Insulation Masonry Veneer System is a tested, warranted, code compliant and engineered masonry veneer system with monolithic water and air barrier coating and accessory materials, internal drainage, continuous Xterior Insulation, and adhered masonry veneers. Available with either EPS or XPS this insulated system gives the design aesthetics of a stone, brick or tile wall with the advantages of a lightweight system decreasing installation time and structure costs.

USES

Exterior, new, retrofit, residential, multifamily, commercial, panelized, institutional, hotels, hospitals, retail centers, schools, condominiums, and government facilities. High Impact Systems Available.

DOWNLOAD DOCUMENTS

System Bulletin:

Product Datasheets:

Specifications:

Details:

Code Reports:

All Files:

Components

Substrate
  • ASTM C1177 glass mat faced sheathing
  • ASTM C1325 Type A Exterior cement-board
  • Exposure I or exterior plywood sheathing (grade C-D or better)
  • Exposure I OSB
  • Poured concrete/unit masonry/brick
WaterShield Water and Air Barrier Assembly
  • WaterShield Water & Air Barrier
  • WaterShield Flashing Tape
  • WaterShield Joint Mesh
  • FXI FlashFill
Means of Drainage / Insulation Board Attachment
  • Vertical Ribbons of Adhesive
Continuous Insulation
  • Styrofoam™ Panel Core 20 (no substitutions)
  • 1 pcf Expanded Polystyrene
Base Coat
  • Xi-Acrylic Base Coat
Reinforcing Mesh
  • Xi-Mesh11
Adhered Veneer Mortar
  • Xi-Masonry Veneer Mortar
Veneer Units
  • Manufactured Stone Veneer
  • Natural Stone Veneer
  • Thin Brick
  • Tiles
  • -Adhered Veneers are not to exceed 36 inches in any face dimension, 5 square feet in total face areas, 2-5⁄8 inches thick or 15 pounds per square foot.

Limitations

  • Ambient and surface temperature must remain above 40ºF (4ºC) during and for 24-hours after set has occurred.
  • Protect applied product from inclement weather until dry.
  • Fire Rated and Non combustible assemblies must be per the current Evaluation Report.
  • System must terminate above grade per the current Evaluation Report.
  • No additives are permitted to any components unless specifically approved by FXI.
  • Follow the application instructions for each component.
  • Use only on surfaces that are sound, dry, clean, unpainted, and free from any residue that may affect the ability of the FACADESXi Products to bond.
  • Watershield should not be left exposed more than 6 months.
  • For use on vertical above grade walls only.
  • Maintenance Required: Follow Adhered Veneer Manufacturers' Recommendations.

Advantages

  • WaterShield provides and enhanced water and air barrier for envelope protection.
  • Continuous Insulation outperforms cavity insulation and gives greater energy savings.
  • Impact resistant systems available.
  • Mold and mildew resistant Finishes.
  • Unlimited color and design aesthetics.
  • Labor costs and time savings.
  • Single source warranty.
  • Lower Cladding Weight for decreased structural requirements.
  • Non-combustible and Fire resistant assemblies are available.
  • High Strength Mortar for Secure attachment.