Facades Xi Stucco Systems

FacadesOne IronClad Xi Series

FacadesOne IronClad Xi Series

FacadesOne IronClad Xi-Series is an engineered one coat stucco assembly with with the added protection of a seamless water and air barrier coating, FractureStop layers, and Xterior Insulation in a warrantable assembly. It gives the maximum weather protection,energy efficiency, water drainage and resistance to cracking available on the market today with a single source and complete warranty available.

USES

Exterior, interior, high impact requirement, new, retrofit, residential, multi-family, commercial, panelized, institutional, hotels, hospitals, retail centers, schools, condominiums, and government facilities

DOWNLOAD DOCUMENTS

System Bulletin:

Product Datasheets:

Specifications:

Code Reports:

All Files:

Components

Substrate
    With code compliant lath & water resistive barrier
  • ASTM C1177 glass mat faced sheathing
  • ASTM C79/C1396 exterior gypsum sheathing
  • ASTM C1325 Type A Exterior cement-board
  • Exposure I or exterior plywood sheathing (grade C-D or better)
  • Exposure I OSB
  • Poured concrete/unit masonry/brick
WaterShield Water and Air Barrier Assembly
  • WaterShield Water & Air Barrier
  • WaterShield Flashing Tape
  • WaterShield Joint Mesh
  • FXI FlashFill
Means of Drainage
  • Drainage Mat
  • Grooved Insulation Board
  • Polyolefin water barrier with internal means of drainage
    • Drainage plane is required in certain types of construction.
Xi Continuous Insulation
  • Expanded Polystyrene
  • Extruded Polystyrene
  • Polyisocyanurate
  • Mineral Wool
Code compliant lath
  • Metal Lath
  • Plastic Lath
FacadesOne One Coat stucco: 3/8
  • FACADESOne Concentrate: factory mix of portland cement complying with ASTM C150, chopped fibers, and proprietary ingredients mixed with water and sand in the field.
  • FacadesOne Sanded: factory mix of sand, portland cement complying with ASTM C150, chopped fibers, and proprietary ingredients mixed only with water in the field
FractureStop Layer
  • Xi-Dry Acrylic Base Coat or Xi-Acrylic Base Coat
  • Xi-Mesh Standard Reinforcing Mesh
Primer (Optional per specification) – for decreased efflorescence and highest finish coat aesthetic performance.
  • Xi-Alkali Resistant Primer
  • Xi-FastPrime
Finish Coat – Integrally colored and textured. Unlimited color selection, dirt pick up resistant
  • Xi-Textured Acrylic Finish
  • Xi- Flexx Finish

Limitations

  • Framed walls must terminate stucco a minimum of 4-inches above grade, 2-inches above finished grade, or as specified by local code.
  • Moist curing must be provided per specifications.
  • Ambient and surface temperature must remain above 40ºF (4ºC) during and for 24-hours after set has occurred.
  • Protect applied product from inclement weather until dry.
  • Efflorescence is a natural occurrence when using cement based products subject to exterior or wet environments.
  • No additives are permitted to any components unless specifically approved by FXI.
  • Follow the application instructions for each component.
  • Cracking will occur in portland cement stucco. This statement is true of any Portland cement based product and is not a defect of the product. Cracking can be minimized by following best practices in the FaçadesOne Stucco Handbook; including proper installation of lath, proper use of control and expansion joints, proper sand selection, proper proportioning of stucco mix, avoiding the use of excess water, moist curing of the stucco after it has been applied, and proper sequencing of construction to avoid stresses in the freshly placed stucco.
  • Use only on surfaces that are sound, dry, clean, unpainted, and free from any residue that may affect the ability of the FACADESXi Products to bond.
  • Watershield should not be left exposed more than 6 months.
  • Ensure Lath fasteners are secured into framing members.
  • For use on vertical above grade walls only.
  • Dark colors may show efflorescence more easily and imperfection in the stucco base coat compared to light colors.
  • Maintenance Required: periodic cleaning, repair of cracks and impact damage if they occur, recoating to enhance appearance of weathered finish.

Advantages

  • WaterShield provides and enhanced water and air barrier for envelope protection.
  • Factory prepared mixed stucco base for consistent field quality control.
  • Impact and puncture resistant.
  • Highest quality acrylic and elastomeric finishes.
  • EPS shapes for archi tectural details
  • Reduced Labor
  • Non-combustible and Fire resistant assemblies are available
  • Enhanced Warranty Available.
  • R-Value for increased energy efficeincy.
  • FractureStop Layer increases water resistance and crack resistance.