FacadesOne Sanded is a pre-mixed stucco base coat consisting of portland cement, fibers, sand, and additives that can be applied in One Coat at 3⁄8″ thick; designed specifically for the FACADESXi Stucco Wall Systems. When mixed on site with only water, this product combines the long-life cycle, durability and traditional aesthetics of three coat stucco with lower labor costs and shorter scheduling.
  • Sand Quantity and Quality is Factory Controlled
  • No need to source sand per project
  • Can be applied as ASTM C926 Three coat at 3⁄4″
  • Factory prepared stucco base for consistent field quality control
  • Impact and puncture resistant
  • Reduced Labor at 3⁄8″
  • Shorter construction schedule
  • Lower Cladding Weight for decreased structural requirements
  • FacadesOne Stucco Assemblies: 3⁄8″ thick Stucco Base Coat.
  • Three Coat Stucco Assemblies: Traditional ¾” scratch & brown stucco base complying with ASTM C926
  • Masonry Veneer Assemblies: Masonry Veneer Mortar bed when mixed with Xi-Admix & Bonding Agent
  • FACADESXi Stucco Assembly Substrates/Sheathings:
    With code compliant lath, water resistive barrier
    • ASTM C1177 glass mat faced sheathing
    • ASTM C79/C1396 exterior gypsum sheathing
    • ASTM C1325 Type A Exterior cement-board
    • Exposure I or exterior plywood sheathing (grade C-D or better)
    • Exposure I OSB,
    • Poured concrete/unit masonry/brick
    • Open Framing (3⁄8″ thickness Only)
    • Continuous Insulation
    Direct Application
    • Concrete
    • Concrete masonry (CMU)
    • Poured concrete
    • Brick
  • Non-combustible Assemblies & Fire resistant assemblies: Refer to FacadesOne UES Evaluation Report ER687.
80 lb (36 kg) Bags

Approximate coverage per thickness per bag will be as follows:

  • 3⁄8″ (9.5 mm) = 20-25 ft² (1.8-2.3 m²)
  • 1⁄2″ (12.7 mm) = 15-19 ft² (1.4-1.8 m²)
  • 3⁄4″ (19.0 mm) = 10-13 ft² (0.9-1.2 m²

Coverages are approximate and will vary depending on application methods and environmental/surface conditions.