DOWNLOADABLE RESOURCE
FACADESXi FACADESTHREE CONCENTRATE
DESCRIPTION AND USAGE
FacadesThree Concentrate is a pre-mixed ASTM C926 code compliant stucco base coat consisting of portland cement, fibers, and additives designed specifically for the FACADESXi Stucco Wall Systems and as a traditional scratch and brown. Mixed on site with sand and water.
- ASTM C926 compliant
- Warrantable Assemblies
- Spray and hand applications
- Less waste than field mixes
- Factory prepared stucco base for consistent field quality control
- Impact and puncture resistant
- FacadesThree Stucco Assemblies: scratch & brown stucco base complying with ASTM C926
- FACADESXi Stucco Assembly Substrates/Sheathings:
With code compliant lath, water resistive barrier
- ASTM C1177 glass mat faced sheathing
- ASTM C79/C1396 exterior gypsum sheathing
- ASTM C1325 Type A Exterior cement-board
- Exposure I or exterior plywood sheathing (grade C-D or better)
- Exposure I OSB
- Poured concrete/unit masonry/brick
- Continuous Insulation
Direct Application
- Concrete
- Concrete masonry (CMU)
- Poured concrete
- Brick
- Non-combustible Assemblies & Fire resistant assemblies.
80 lb (36 kg) Bags
Sand quantity will affect coverage, but the approximate coverage per thickness per bag will be as follows:
- 3/8″ (9.5 mm) = 75-90 ft² (7-8.4 m²)
- 1/2″ (12.7 mm) = 60-72 ft² (5.6-6.7 m²)
- 3/4″ (19.0 mm) = 37-45 ft² (3.5-4.2 m²)
Coverages are approximate and will vary depending on application methods and environmental/surface conditions.
Get all Documentation you Need- Go To Documentation Center