FacadesThree Sanded is a pre-mixed ASTM C926 code compliant stucco base coat consisting of portland cement, sand, fibers, and additives designed specifically for the FACADESXi Stucco Wall Systems and as a traditional scratch and brown. Mixed on site with only water.
  • Sand Quantity and Quality is Factory Controlled
  • No need to source sand per project
  • ASTM C926 compliant
  • Warrantable Assemblies
  • Spray and hand applications
  • Less waste than field mixes
  • Factory prepared stucco base for consistent field quality control
  • Impact and puncture resistant
  • FacadesThree Stucco Assemblies: scratch & brown stucco base complying with ASTM C926
  • FACADESXi Stucco Assembly Substrates/Sheathings:
    With code compliant lath, water resistive barrier
    • ASTM C1177 glass mat faced sheathing
    • ASTM C79/C1396 exterior gypsum sheathing
    • ASTM C1325 Type A Exterior cement-board
    • Exposure I or exterior plywood sheathing (grade C-D or better)
    • Exposure I OSB,
    • Poured concrete/unit masonry/brick
    • Continuous Insulation
    Direct Application
    • Concrete
    • Concrete masonry (CMU)
    • Poured concrete
    • Brick
  • Non-combustible Assemblies & Fire resistant assemblies.
80 lb (36 kg) Bags

Approximate coverage per thickness per bag will be as follows:

  • 3⁄8″ (9.5 mm) = 20-25 ft² (1.8-2.3 m²)
  • 1⁄2″ (12.7 mm) = 15-19 ft² (1.4-1.8 m²)
  • 3⁄4″ (19.0 mm) = 10-13 ft² (0.9-1.2 m²)

Coverages are approximate and will vary depending on application methods and environmental/surface conditions.