FACADESXi FACADESTHREE CONCENTRATE

FACADESXi FACADESTHREE CONCENTRATE

DESCRIPTION AND USAGE

FacadesThree Concentrate is a pre-mixed ASTM C926 code compliant stucco base coat consisting of portland cement, fibers, and additives designed specifically for the FACADESXi Stucco Wall Systems and as a traditional scratch and brown. Mixed on site with sand and water.
  • ASTM C926 compliant
  • Warrantable Assemblies
  • Spray and hand applications
  • Less waste than field mixes
  • Factory prepared stucco base for consistent field quality control
  • Impact and puncture resistant
  • FacadesThree Stucco Assemblies: scratch & brown stucco base complying with ASTM C926
  • FACADESXi Stucco Assembly Substrates/Sheathings:
    With code compliant lath, water resistive barrier
    • ASTM C1177 glass mat faced sheathing
    • ASTM C79/C1396 exterior gypsum sheathing
    • ASTM C1325 Type A Exterior cement-board
    • Exposure I or exterior plywood sheathing (grade C-D or better)
    • Exposure I OSB
    • Poured concrete/unit masonry/brick
    • Continuous Insulation
    Direct Application
    • Concrete
    • Concrete masonry (CMU)
    • Poured concrete
    • Brick
  • Non-combustible Assemblies & Fire resistant assemblies.
80 lb (36 kg) Bags

Sand quantity will affect coverage, but the approximate coverage per thickness per bag will be as follows:

  • 3/8″ (9.5 mm) = 75-90 ft² (7-8.4 m²)
  • 1/2″ (12.7 mm) = 60-72 ft² (5.6-6.7 m²)
  • 3/4″ (19.0 mm) = 37-45 ft² (3.5-4.2 m²)

Coverages are approximate and will vary depending on application methods and environmental/surface conditions.