
FACADESXi Xi-EZ ADHESIVE
DESCRIPTION AND USAGE
Xi-EZ Adhesive is a ready-to-use 100% acrylic adhesive specifically for the FACADESXi Wall Systems. This noncementitious adhesive adheres insulation boards to approved substrates, including approved painted and metal panel buildings.
- Ready-to-use, No Mixing
- Wet Polymer gives excellent adhesion
- Mildew Resistant
- Vapor Permeable
- Smooth consistency for easy application
- FACADESXi EIF Systems Insulation Board Adhesive to approved substrates:
- ASTM C1177 type sheathings:
– DensGlass® sheathing
– GlasRoc® sheathing
– Weather Defense® sheathing
– eXP® sheathing - ASTM C1325 Type A Exterior cement-board: PermaBase
- Poured concrete/unit masonry/brick
- Untreated Exposure I or exterior plywood sheathing (grade C-D or better)
- Untreated Exposure I OSB
- Gypsum sheathing (ASTM C79/ASTM C1396)
- See System Specifications for required system components and requirements for Xi-WaterShield
- ASTM C1177 type sheathings:
- Metal panels (in conjunction with fasteners)
- Painted Substrates (with bond testing and FXI written approval)
60 lb (27.2 kg) Pail
Adhesive
- 1/2″ x 1/2″ x 1-1/2″ (13 mm x 13 mm x 38 mm) = 200-230 ft²
- (18.6 m² – 21.3 m²)
- 5⁄8″x 5⁄8″ x 5⁄8″ (16mm x 16 mm x 16 mm) = 150 ft² (14 m²)
Coverages are approximate and will vary depending on application methods and environmental/surface conditions.
Get all Documentation you Need
- Go To Documentation Center